Smart Toilet Flush Sensor

Product Description

Model	LGT-ST1
Color	white
Name	Toilet induction flush
Cutting size	148*123*mm
Connector	Sensor

 

Product parameters product name: toilet induction flush
color: white
Battery capacity: 2000mAh
Induction distance: 0-15cm
Product net weight: 231g
Product material: ABS
Matte charging mode: 5V
Induction time 0.25 s
standby time: about 3 months (calculated by using frequency 25 times per day)

1.Open the aromatherapy trough on top of the machine and cover it 2.Clear the  surface
3.Put the toilet sensor on top of the water tank button, check the gap between the flush button and the press head, select the suitable press head to install
4..Remove the double-sided adhesive film from the bottom, point the product pressure head at the water flush button, and press hard (Note: It is recommended to enlarge the water flush button side, because the product has only one pressure head)
5.Press the switch button on the top of the machine for 2 seconds to start the machine. After starting the machine, wave your hand to test if the machine is in normal use
6.To charge, press the buttons on both sides of the machine up to pick up the machine to charge, after charging the bottom of the two fixed parts can be pressed down

 

Product features:

1, Both of Jumper module and fixed module are easy and quickly to connect;
2, Our cover-flipping and cover-sliding are simple and easy to operate;
3, You can choose any module as your requirements;
4, The panel is  made of top-grade horniness aluminum which is  treated  with oxidation,brushed,be painted and so on. The above will let the products more high-quality and luxury;
5, The configuration is with 1.5m cables;

 

    Product Display: