| Customization: | Available |
|---|---|
| Usage: | Home, Business, Teaching |
| Transport Package: | Carton/Wooden Box |
|
Still deciding? Get samples of US$ 2000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| LGT-P4
Thank you for choosing us. Please read this manual carefully before using the product. Matters needing attention 1. Non-full-time personnel or unauthorized repair personnel are not allowed to repair or transform the machine by themselves. 2. Before plugging in the power supply, please check whether the rated voltage indicated on this product is consistent. 3, before the test, please lift the lifting rod to maintain the vertical state, and equipped with a weight of 5-10kg or so. 4. It is strictly prohibited to insert thin wire or other foreign matter into any pore in the machine. 5, please keep the power supply, control interface and other sockets clean, to avoid short circuit and bad contact. 6. Do not install more than the nominal load weight of the machine. 7. The installation shall ensure that the outlet of the machine is not blocked by other things and that there is enough outlet space. 8, debugging limit must not put the cloth to more than the telescopic travel, can not let the aluminum tube itself bear gravity, can only let the cloth belt bearing. Especially when the lifting equipment is very heavy, we must consult the professional technology first. Note: in the first time to install this product, please consult the seller or us, to ensure that you provide the most professional guidance service! Technical indicators Operating voltage: 220V. Motor: German-made AC tubular motor, stable and safe, with overheat protection function, running time within 5 minutes. Weight: 45 kg or less. Remote control distance: ≤50m (open) Battery Type: No. 7 battery *2 (3V) Power: 5MW Control mode: weak current contact, RS232 (can be grouped control), wireless remote control, manual switch. Lifting precision: ≤2mm Noise: acuities were 60 db Wiring mode: electric coil and tube push wire (optional) Limit mode: electronic precise limit upper and lower double positioning (Product execution standard: EN60950-1. ECE62321:2015) Packaging components 1. Lifting mechanism 2. Power cord 3. Decorative bottom plate 4. Stainless steel screw rod (4 pieces) 5. Remote control 6. Screw package 7. 9. Adjust the limit bar The structure diagram The installation note Installation foundation: must be hoisted on a solid and stable board or steel frame, no vibration and shaking, to ensure that the lifting rod in the vertical state. Outlet requirements: ensure that the outlet position is not blocked by sundries, the space area is enough to store the line, and the up-down process of the line is kept without interference. Indoor wind speed: the lifting point should try to avoid the impact of air conditioning outlet and other equipment used by the camera and projector. Remote control setting operation (1) Remote control code operation: switch on the power and hold the LEARN button on the receiving box for 3-5 seconds. The red indicator light on the receiver will flash slowly. Within 10 seconds, press the UP button on the remote control. (2). Point and move switch: press the stop button of the remote control of the right code for 5 seconds, the receiver's red light will flash slowly, press the up button of the remote control once within 10 seconds, and the blue light will flash quickly for 3 times, and the setting is successful. (3). Delete the remote control: press the stop button of the remote control with the right code for 5 seconds, the red light of the receiver will flash slowly, press the back button of the remote control once within 10 seconds, and the blue light will flash quickly for 3 times, and the setting is successful. 2 Limit adjustment: One knob controls the upper limit and one knob controls the lower limit. According to the mark on the machine, the upper limit rotates to the "+" direction, indicating that the limit continues to go up, that is, the upper limit increases. Rotation in the direction of "-" indicates advance limit, i.e. upper limit drop. Rotation of the lower limit in the "+" direction indicates that the lower limit continues to go down, i.e. the lower limit drops. Rotation in the direction of "-" indicates advance limit, i.e. lower limit rise.(pay attention to the adjustment of the time, please adjust while testing, so as not to adjust wrong, adjustment is a little rotation, limit change a little) The factory has set the upper limit, that is, the upper limit can not be adjusted again. The lower limit should not be put too long. The cloth belt is used for loading, and the bamboo joint can not bear the weight, otherwise it will lead to the bamboo joint falling off. Note: before hanger limit yet, please in the weights have let hanger drop after rising to the longest state and then began to set limit, keep the tape tight state, weight is not enough when the up or down the length of the tape put leads to longer than bamboo bamboo damaged bamboo or motor and load drop suddenly, remember! (That is, the friction force of the bamboo joint is greater than the load, which will lead to accidental shedding). Central control connection (6P crystal head connection is adopted for interface) Contact control (weak current relay) 2. down 3. stop 4. up 5. public 2 and 5. contact with the drop 3. and 5. contact will stop 4. and 5. go up when they touch each other RS232 control or RS485 control Machine connection (signal grounding). 6 Pin (signal reception) Serial port setting: baud rate 2400. Data bit: 8 Checkout bit: N stop bit 1. Group control code (hexadecimal) Rise: 9a 00 01 00 0a dd d6 (repeatedly sent five times) Stop: 9a 00 01 00 0a cc c7 (repeat five times) Descending: 9a 00 01 00 0a ee e5 (repeatedly sent five times) CE declaration of conformity: We promise that this product meets the following standards or norms. If there is any problem, we will take full responsibility: EN60950-1:2006+A11,2009+A1,2010+A12,2011+A2,2013 IEC62321:2008,IEC62321-4:2013,IEC62321-5:2013 |
){kind=link}