2.4 bluetooth Flying Mouse Remote

• Customization: Available
• Application: Led Products, TV, Audio / Video Players, Household Appliances
• Battery Type: AAA Battery
• Model NO.: RM18BA
• Material: ABS
• Transmission Distance: <50m
• Type: Button
• Universal: Universal
• Voltage: 12V
• Signal Transmission: IR Remote Control
• Transport Package: Carton
• Specification: 200
• Trademark: LGT
• Origin: China
• HS Code: 8529909090
• Production Capacity: 5000 Piece Per Month

Product Description

 

RM-18BA
size:1.6*1.9*7.3cm
2.4 buletooth flying mouse

Compatible TV model:

W8, E8, C8, B8, sk9500 sk9000 sk8070, sk8000 uk7700 uk6570, uk6500 uk6300 

43UK6300PLB 49UK6300PLB 55UK6300PLB 65UK6300PLB 43UK6500PLA 50UK6500PLA 55UK6500PLA 65UK6500PLA 75UK6500PLA 86UK6500PLA 49SK800PLB 55SK800PLB 65SK800PLB OLED55B8SLC OLED65B8SLC OLED77W8PLA OLED65W8PLA OLED65E8PLA OLED55E8PLA OLED77C8LLA OLED65C8PLA OLED55C8PLA

 

OLED55C8P

OLED55E8P

OLED65C8P

OLED65E8P

OLED65W8P

OLED77C8P

OLED77W8P

SK8000

SK8070

SK9000

SK9500

UK6200PLB

UK6300

UK6400

UK6470

UK6500

UK6570

UK6750

UK7700

SK800
SK9500
 

Performance specification:
1 , effective distance and directivity test:
When testing within valid distances, the use of the supplied receiver does not allow any nonstandard operation.
1.1 partial angle theta = 5 DEG (,, left, right) to launch effective distance should be greater than or equal to 8.0M.
The 1.2 level is in the angle theta =45 degrees (left, right) to launch effective distance of more than 6.0M.
1.3, the vertical angle of the oblique angle at theta =30 degrees (up, down).
2. Infrared peak irradiance of remote controller:
In the natural light or fluorescent lamp 200 + 50lx environment illumination, the remote controller uses the power supply voltage under the rated operating voltage condition, in the remote control launching point
With the peak level of light illumination instrument by vertical axis distance 0.5M, press the remote control button, the infrared emission peak irradiance should not be less than 40uW/c square meter
2.1 directivity (working voltage 3.0V):
The remote control of the red light emission peak irradiance is 20uW/c square meters, with the remote launch point for the vertex angle should not be less than 30 degrees.
2.2 the directivity of the remote controller under undervoltage conditions (operating voltage 2.25V):
Infrared remote control peak irradiance is 10uW/c square meters, with the remote launch point for the vertex angle of not less than 30 degrees.
3. Environmental testing:
3.1 high temperature storage test:
Remote control in the temperature of 55 degrees Celsius environment, after the use of 2h, restore 2h, should meet the requirements, no abnormal work.
3.2 constant damp heat test:
Remote control in the temperature of 40 degrees, relative humidity of 93% in the environment, after the use of 96h, after the restoration of 4h, should be all normal.
3.3 low temperature storage test:
Remote control in the temperature of -25 degrees when the environment, after the use of 2h, restore 2h, should be all normal.
3.4 temperature change test
The remote control should be able to withstand the temperature cycle test shown in the following diagram. After 6 cycles of testing, everything should be normal.
4 , free fall test
The remote controller is free of charge in the condition of battery loading. It falls freely from 80Cm height to no more than 3Cm thick wooden floor.
Test, according to the test surface shown below, according to the order of 3-2-4-5-6-1 fall, cycle three times.
After the test, the remote control should not be cracked, the battery cover does not fall off and so on, all button functions should be normal.
5, waveform
6 , scanning vibration test
The remote control shall be able to withstand the vibration test as specified in the following table. After the test, the remote control shall be in normal condition.
Frequency range (Hz)
Displacement amplitude (mm)
Scan cycle times
Requirement
10~30 to 10
Zero point seven five
Five
Vibration on the vertical axis of the work surface
30~55 to 30
Zero point one five
6 , scanning vibration test
The remote control shall be able to withstand the vibration test as specified in the following table. After the test, the remote control shall be in normal condition.

 

frequency range Hz	Displacement amplitude mm	Scan cycle times	Requirement
10-30-10	0.75	5	Vibration on the vertical axis of the work surface
30-55-30	0.15	5	Vibration on the vertical axis of the work surface

 Others for reference: