The World Most Advance Remote Controller

Product Details
Customization: Available
Application: LED Products, TV, Household Appliances
Battery Type: AAA Battery
Still deciding? Get samples of US$ 15/Piece
Request Sample
Diamond Member Since 2017

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Management System Certification
ISO 9001, ISO 9000
OEM/ODM Availability
Yes
  • The World Most Advance Remote Controller
  • The World Most Advance Remote Controller
  • The World Most Advance Remote Controller
  • The World Most Advance Remote Controller
  • The World Most Advance Remote Controller
  • The World Most Advance Remote Controller
Find Similar Products

Basic Info.

Model NO.
LGT-R1
Certification
CE
Material
ABS
Transmission Distance
<50m
Type
Button
Voltage
12V
Universal
Universal
Signal Transmission
IR Remote Control
Transport Package
Carton
Specification
200
Trademark
LGT
Origin
China
HS Code
8529909090
Production Capacity
5000 Piece Per Month

Product Description


Common
LCD/LED TV remote
the world most advance remote controller
WM-UN002+
Characteristics
it is the newest universal 

This product is a self-developed product.  It is specially designed for all series of TV remote controllers of TOSHIBA at home and abroad. It is not required to be set up, but it can be used immediately with batteries installed!

Performance specification:
1 , effective distance and directivity test:
When testing within valid distances, the use of the supplied receiver does not allow any nonstandard operation.
1.1 partial angle theta = 5 DEG (,, left, right) to launch effective distance should be greater than or equal to 8.0M.
The 1.2 level is in the angle theta =45 degrees (left, right) to launch effective distance of more than 6.0M.
1.3, the vertical angle of the oblique angle at theta =30 degrees (up, down).
2. Infrared peak irradiance of remote controller:
In the natural light or fluorescent lamp 200 + 50lx environment illumination, the remote controller uses the power supply voltage under the rated operating voltage condition, in the remote control launching point
With the peak level of light illumination instrument by vertical axis distance 0.5M, press the remote control button, the infrared emission peak irradiance should not be less than 40uW/c square meter
2.1 directivity (working voltage 3.0V):
The remote control of the red light emission peak irradiance is 20uW/c square meters, with the remote launch point for the vertex angle should not be less than 30 degrees.
2.2 the directivity of the remote controller under undervoltage conditions (operating voltage 2.25V):
Infrared remote control peak irradiance is 10uW/c square meters, with the remote launch point for the vertex angle of not less than 30 degrees.
3. Environmental testing:
3.1 high temperature storage test:
Remote control in the temperature of 55 degrees Celsius environment, after the use of 2h, restore 2h, should meet the requirements, no abnormal work.
3.2 constant damp heat test:
Remote control in the temperature of 40 degrees, relative humidity of 93% in the environment, after the use of 96h, after the restoration of 4h, should be all normal.
3.3 low temperature storage test:
Remote control in the temperature of -25 degrees when the environment, after the use of 2h, restore 2h, should be all normal.
3.4 temperature change test
The remote control should be able to withstand the temperature cycle test shown in the following diagram. After 6 cycles of testing, everything should be normal.
4 , free fall test
The remote controller is free of charge in the condition of battery loading. It falls freely from 80Cm height to no more than 3Cm thick wooden floor.
Test, according to the test surface shown below, according to the order of 3-2-4-5-6-1 fall, cycle three times.
After the test, the remote control should not be cracked, the battery cover does not fall off and so on, all button functions should be normal.
5, waveform
6 , scanning vibration test
The remote control shall be able to withstand the vibration test as specified in the following table. After the test, the remote control shall be in normal condition.
Frequency range (Hz)
Displacement amplitude (mm)
Scan cycle times
Requirement
10~30 to 10
Zero point seven five
Five
Vibration on the vertical axis of the work surface
30~55 to 30
Zero point one five
6 , scanning vibration test
The remote control shall be able to withstand the vibration test as specified in the following table. After the test, the remote control shall be in normal condition.


A large number of OEM customized products are accepted and produced according to customer's requirements without any design fees.

Universal air conditioner remote controller

This product is specially developed and produced by our company for export (no copyright involved, no patent), and is exported to 5 continents.

Product weight: 69g (including package)

Individual products include: remote controller packaged in transparent environmental protection bag+all-English instructions+carton packaging

40 remote controls = a small box 6 small box remote controls = a large box

Therefore, if your purchase quantity exceeds 40, you'd better choose an integer of 40
 
frequency range
Hz
Displacement amplitude
mm
Scan cycle times Requirement
10-30-10 0.75 5 Vibration on the vertical axis of the work surface
30-55-30 0.15 5 Vibration on the vertical axis of the work surface

The World Most Advance Remote Controller
The World Most Advance Remote Controller
The World Most Advance Remote Controller



 






 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier